PIC18F54Q71

Support summary

• Programming - Yes
• Debugging provisions - Yes

ICSP Connection

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

LVP Programming

Low-Voltage Programming (LVP) can only be used for these PIC devices if the LVP configuration bit is enabled. Fresh (unprogrammed) devices have LVP bit set and therefore they can be programmed. It is impossible to disable LVP bit during LVP programming, but if the device has been previously programmed with HVP programmer, the LVP bit may have been disabled.

When brown-out is enabled with BOREN configuration bit, LVP is only possible when the VDD voltage is above the brown-out threshold.

These limitations may be avoided with High-Voltage Programming (HVP). NSDSP-2 can generate high voltage for HVP internally. NSDSP-1 cannot, therefore NSDSP-1 requires NSHVX or an external circuit for HVP.

HVP Programming

NSDSP-2 can program PIC18F54Q71 with HVP.

With NSDSP-1, HVP programming is possible, but only with NSHVX High Voltage Extension or an external HVP circuit.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC18F54Q71 and may be debugged when debugging software becomes available.

PIC18F54Q71 uses ordered haliting, has 3 hardware breakpoints.

Debugging does not consume resources in the user space.

Links

Microchip PIC18F54Q71 page