PIC18F87J10PIC18F87J11 PIC18F87J50 PIC18F87J60 PIC18F87J72 PIC18F87J90 PIC18F87J93 PIC18F87J94 PIC18F87K22 PIC18F87K90 PIC18F95J94 PIC18F96J60 PIC18F96J65 PIC18F96J94 PIC18F96J99 PIC18F97J60 PIC18F97J94
This PIC device is equipped with extremely low endurance flash. The datasheet specification guarantees only 100 erase/write cycles. It is easy to wear the flash out during development.
All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.
Refer to the datasheet for alternative connections of ENVREG pin.
NSDSP firmware contains all the necessary provisions for debugging PIC18F87J10 and may be debugged when debugging software becomes available.
This device can only be debugged when it runs at 2MHz or faster. This can only be accomplished with external clock source.
© 2007-2018 Northern Software Inc. All Rights Reserved.