Buy(Cart) Contact NSDSP Home

PIC32MK0512GPG064

ICSP connection

Support summary

  • Programming - Yes
  • Debugging provisions - Yes

ICSP Connection

PIC32MK0512GPG064 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

TDO pin will toggle at high frequency during programming. Make sure this does not harm your circuit.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC32MK0512GPG064 and may be debugged when debugging software becomes available.

PIC32MK0512GPG064 uses ordered haliting, has 10 hardware breakpoints.

Debugger requires 896 bytes of ROM and 20 bytes of RAM.

TDO pin does not work during debugging.

Links

Microchip PIC32MK0512GPG064 page

Northern Software Home NSDSP Contact Us Purchase/Vew Cart

© 2007-2024 Northern Software Inc. All Rights Reserved.