PIC32MK0128MCA032PIC32MK0128MCA048 PIC32MK0256GPG048 PIC32MK0256GPG064 PIC32MK0256MCJ048 PIC32MK0256MCJ064 PIC32MK0512GPD064 PIC32MK0512GPD100 PIC32MK0512GPE064 PIC32MK0512GPE100 PIC32MK0512GPG048 PIC32MK0512GPG064 PIC32MK0512GPK064 PIC32MK0512GPK100 PIC32MK0512MCF064 PIC32MK0512MCF100 PIC32MK0512MCJ048 PIC32MK0512MCJ064 PIC32MK0512MCM064 PIC32MK0512MCM100 PIC32MK1024GPD064 PIC32MK1024GPD100 PIC32MK1024GPE064 PIC32MK1024GPE100 PIC32MK1024GPK064 PIC32MK1024GPK100 PIC32MK1024MCF064 PIC32MK1024MCF100 PIC32MK1024MCM064 PIC32MK1024MCM100
PIC32MK0128MCA032 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.
All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.
NSDSP firmware contains all the necessary provisions for debugging PIC32MK0128MCA032 and may be debugged when debugging software becomes available.
PIC32MK0128MCA032 uses ordered haliting, has 10 hardware breakpoints.
Debugger requires 896 bytes of ROM and 20 bytes of RAM.
© 2007-2024 Northern Software Inc. All Rights Reserved.