PIC24FJ96GA010

Support summary

• Programming - Yes
• Debugging provisions - Yes

ICSP Connection

This PIC device is equipped with extremely low endurance flash. The datasheet specification guarantees only 100 erase/write cycles. It is easy to wear the flash out during development.

PIC24FJ96GA010 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

Refer to the datasheet for alternative connections of ENVREG pin.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC24FJ96GA010 and may be debugged when debugging software becomes available.

Links

Microchip PIC24FJ96GA010 page