dsPIC33CH64MP508 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.
All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.
NSDSP firmware contains all the necessary provisions for debugging dsPIC33CH64MP508 and may be debugged when debugging software becomes available.
© 2007-2022 Northern Software Inc. All Rights Reserved.