Cart Contact NSDSP Home

PIC32MM0256GPM064

ICSP connection

Support summary

  • Programming - Yes
  • Debugging provisions - Yes

ICSP Connection

PIC32MM0256GPM064 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

Programming Benchmarks

We have measured time necessary to program and verify PIC32MM0256GPM064.

Operation Time
Programming and Verification 5.6s
Programming only 5.1s
Verification only 4.4s

The measurements reflect the time necessary to program/verify the entire chip, including all user programmable memory areas.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC32MM0256GPM064 and may be debugged when debugging software becomes available.

PIC32MM0256GPM064 uses ordered halting, has 6 hardware breakpoints.

Debugger requires 768 bytes of ROM and 20 bytes of RAM.

Links

Microchip PIC32MM0256GPM064 page

Northern Software Home NSDSP Contact Us Purchase/View Cart

© 2007-2025 Northern Software Inc. All Rights Reserved.