PIC24HJ256GP206PIC24HJ256GP206A PIC24HJ256GP210 PIC24HJ256GP210A PIC24HJ256GP610 PIC24HJ256GP610A PIC24HJ32GP202 PIC24HJ32GP204 PIC24HJ32GP302 PIC24HJ32GP304 PIC24HJ64GP202 PIC24HJ64GP204 PIC24HJ64GP206 PIC24HJ64GP206A PIC24HJ64GP210 PIC24HJ64GP210A PIC24HJ64GP502 PIC24HJ64GP504 PIC24HJ64GP506 PIC24HJ64GP506A PIC24HJ64GP510 PIC24HJ64GP510A
This PIC device is equipped with extremely low endurance flash. The datasheet specification guarantees only 100 erase/write cycles. It is easy to wear the flash out during development.
PIC24HJ256GP206 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.
All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.
SDO1 pin will toggle at high frequency during programming. Make sure this does not harm your circuit.
NSDSP firmware contains all the necessary provisions for debugging PIC24HJ256GP206 and may be debugged when debugging software becomes available.
© 2007-2021 Northern Software Inc. All Rights Reserved.