PIC24HJ128GP510A

Support summary

• Programming - Yes
• Debugging provisions - Yes

ICSP Connection

PIC24HJ128GP510A has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

SDO1 pin will toggle at high frequency during programming. Make sure this does not harm your circuit.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC24HJ128GP510A and may be debugged when debugging software becomes available.

Links

Microchip PIC24HJ128GP510A page