PIC32MX695F512LPIC32MX764F128H PIC32MX764F128L PIC32MX775F256H PIC32MX775F256L PIC32MX775F512H PIC32MX775F512L PIC32MX795F512H PIC32MX795F512L
PIC32MX695F512L has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.
All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.
Programming is impossible at voltages below 3.0V.
NSDSP firmware contains all the necessary provisions for debugging PIC32MX695F512L and may be debugged when debugging software becomes available.
PIC32MX695F512L uses addresses 0xbfc00480 through 0xbfc00498 for debugging. This area is known as debugging vector. If there is any user code at this location, NSDSP will automatically overwrite it before debugging.
© 2007-2018 Northern Software Inc. All Rights Reserved.