PIC24F16KA101PIC24F16KA102 PIC24F16KA301 PIC24F16KA302 PIC24F16KA304 PIC24F16KL401 PIC24F16KL402 PIC24F16KM102 PIC24F16KM104 PIC24F16KM202 PIC24F16KM204 PIC24F32KA301 PIC24F32KA302 PIC24F32KA304
PIC24F16KA101 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.
Low-Voltage Programming (LVP) can only be used for these PIC devices if the MCLRE configuration bit is enabled. Fresh (unprogrammed) devices have MCLRE bit set and therefore they can be programmed. It is impossible to disable MCLRE bit during LVP programming, but if the device has been previously programmed with HVP programmer, the MCLRE bit may have been disabled.
When brown-out is enabled with BOREN configuration bit, LVP is only possible when the VDD voltage is above the brown-out threshold.
These limitations may be avoided with High-Voltage Programming (HVP). NSDSP-2 can generate high voltage for HVP internally. NSDSP-1 cannot, therefore NSDSP-1 requires NSHVX or an external circuit for HVP.
NSDSP-2 can program PIC24F16KA101 with HVP.
NSDSP firmware contains all the necessary provisions for debugging PIC24F16KA101 and may be debugged when debugging software becomes available.
© 2007-2023 Northern Software Inc. All Rights Reserved.