PIC18LF8310

Support summary

• Programming - NSDSP-1 with NSHVX or NSDSP-2
• Debugging provisions - Yes

ICSP Connection

PGEC3/PGED3 pair does not work on this device.

Programming is impossible at voltages below 2.8V.

PIC18LF8310 can only be programmed with HVP (High Voltage Programming). This means it requires Vpp voltage (higher than Vdd) for programming.

NSDSP-2 generates Vpp internally and can program PIC18LF8310.

NSDSP-1 cannot generate Vpp. Therefore, to be programmed with NSDSP-1, PIC18LF8310 requires NSHVX High Voltage Extension or an external HVP circuit.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC18LF8310 and may be debugged when debugging software becomes available.

PIC18LF8310 uses ordered halting, has 3 hardware breakpoints.

Debugger requires 736 bytes of ROM and 16 bytes of RAM.

Links

Microchip PIC18LF8310 page