PIC18LF6390
PIC18LF6393 PIC18LF6410 PIC18LF6490 PIC18LF6493 PIC18LF6520 PIC18LF6525 PIC18LF6527 PIC18LF6585 PIC18LF65K40 PIC18LF65K80 PIC18LF6620 PIC18LF6621 PIC18LF6622 PIC18LF6627 PIC18LF6628 PIC18LF6680 PIC18LF66K40 PIC18LF66K80 PIC18LF6720 PIC18LF6722 PIC18LF6723 PIC18LF67K40 PIC18LF8310 PIC18LF8390 PIC18LF8393 PIC18LF8410 PIC18LF8490 PIC18LF8493 PIC18LF8520 PIC18LF8525 PIC18LF8527 PIC18LF8585 PIC18LF8620 PIC18LF8621 PIC18LF8622 PIC18LF8627 PIC18LF8628 PIC18LF8680 PIC18LF8720 PIC18LF8722 PIC18LF8723PIC18LF6390
Support summary
ICSP Connection
PGEC3/PGED3 pair does not work on this device.
Programming is impossible at voltages below 2.8V.
PIC18LF6390 can only be programmed with HVP (High Voltage Programming). This means it requires Vpp voltage (higher than Vdd) for programming.
NSDSP-2 generates Vpp internally and can program PIC18LF6390.
NSDSP-1 cannot generate Vpp. Therefore, to be programmed with NSDSP-1, PIC18LF6390 requires NSHVX High Voltage Extension or an external HVP circuit.
Debugging
NSDSP firmware contains all the necessary provisions for debugging PIC18LF6390 and may be debugged when debugging software becomes available.
PIC18LF6390 uses ordered halting, has 3 hardware breakpoints.
Debugger requires 736 bytes of ROM and 16 bytes of RAM.
Links
© 2007-2025 Northern Software Inc. All Rights Reserved.