PIC32MZ2051W104132

Support summary

• Programming - Yes
• Debugging provisions - Yes

ICSP Connection

PIC32MZ2051W104132 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

If you use PIC32MZ2051W104132 as a part of Microchip WFI32E module, AVDD, AVSS and the 1.5V rail are already connected.

Programming Benchmarks for NSDSP-3

We have measured time necessary to program and verify PIC32MZ2051W104132 with NSDSP-3.

The measurements reflect the time necessary to program/verify the entire chip, including all user programmable memory areas.

Programming Benchmarks for NSDSP-1 and NSDSP-2

We have measured time necessary to program and verify PIC32MZ2051W104132 with NSDSP-1 or NSDSP-2 (both yeild the same speed).

The measurements reflect the time necessary to program/verify the entire chip, including all user programmable memory areas.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC32MZ2051W104132 and may be debugged when debugging software becomes available.

PIC32MZ2051W104132 uses ordered halting, has 10 hardware breakpoints.

Debugger requires 896 bytes of ROM and 20 bytes of RAM.

Links

Microchip PIC32MZ2051W104132 page