PIC32AK3208GC41064

Support summary

• Programming - Yes
• Debugging provisions - Yes

ICSP Connection

PIC32AK3208GC41064 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

Programming Benchmarks

We have measured time necessary to program and verify PIC32AK3208GC41064.

Operation	NSDSP version x06 or later	Earlier versions
Programming and Verification	0.9s	2.0s
Programming only	0.7s	0.8s
Verification only	0.7s	1.2s

The measurements reflect the time necessary to program/verify the entire chip, including all user programmable memory areas.

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC32AK3208GC41064 and may be debugged when debugging software becomes available.

PIC32AK3208GC41064 uses unordered halting, has 11 hardware breakpoints.

Debugging does not consume resources in the user space.

Links

Microchip PIC32AK3208GC41064 page