nsdsp_adjust_vdd
nsdsp_adjust_vpp nsdsp_set_vdd_override nsdsp_set_rate nsdsp_set_flow_control nsdsp_use_alt_mclr nsdsp_use_method nsdsp_ignore_eeprom nsdsp_ignore_uid nsdsp_allow_otp nsdsp_config_jtag nsdsp_config_debug nsdsp_config_lvp nsdsp_config_cksw nsdsp_config_wdt nsdsp_reset_after_prog nsdsp_set_debug_magic nsdsp_set_debug_rom nsdsp_set_debug_ram nsdsp_set_debug_cores nsdsp_start_spi_session nsdsp_start_uart_session nsdsp_start_prog_session nsdsp_start_debug_session nsdsp_end_sessionnsdsp_adjust_vdd
This function is only supported for NSDSP-3. It turns VDD on and off in the power-on-demand mode.
Syntax
unsigned int nsdsp_adjust_vdd(
nsdsp_t nsdsp,
unsigned int voltage
);
Parameters
nsdsp - a reference to the NSDSP object returned by nsdsp_connect function
voltage - the desired voltage in mV. If 0, uses default voltage stored in the programmer settings. If a voltage outside of the implemented range is specified, turns VDD off.
Return
The function returns non-zero if the voltage level has been successfully set, or zero otherwise.
Minimum library version - 163, implemented for NSDSP-3 in 175
© 2007-2026 Northern Software Inc. All Rights Reserved.