Buy(Cart) Contact Devices Programmer NSDS Home

PIC32MM0032GPL020

Support summary

  • NSDSP Programming - Yes
  • NSDSP Debugging - Yes
  • NSDS Compiler - In Progress
ICSP connection

 

ICSP Connection

PIC32MM0032GPL020 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

 

Programming JTAGEN=OFF

NSDSP requires at least 500kHz speed to program the JTAGEN configuration bit on this device to OFF (0). If you use slower speed, the JTAGEN bit will remain ON (1) and verification will fail. Since NSDSP typically uses much faster speed for programming this doesn't usually pose a problem.

 

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC32MM0032GPL020 with NSDS. Once NSDS support for this device is compliete, NSDS will be able to debug it.

 

Links

Microchip PIC32MM0032GPL020 page

Northern Software Home Development System Programmer/Debugger Supported Devices Contact Us Purchase/Vew Cart

© 2007-2017 Northern Software Inc. All Rights Reserved.