Buy(Cart) Contact Devices Programmer NSDS Home

PIC24HJ128GP306

Support summary

  • NSDSP Programming - Yes
  • NSDSP Debugging - Yes
  • NSDS Compiler - In Progress
ICSP connection

 

ICSP Connection

This PIC device is equipped with extremely low endurance flash. The datasheet specification guarantees only 100 erase/write cycles. It is easy to wear the flash out during development.

PIC24HJ128GP306 has more than one pair of PGECx and PGEDx pins. You can use any pair, but you must use them as a pair. For example, if PGEC2 is used for ICSPCLK, then ICSPDAT must be connected to PGED2.

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

SDO1 pin will toggle at high frequency during programming. Make sure this does not harm your circuit.

 

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC24HJ128GP306 with NSDS. Once NSDS support for this device is compliete, NSDS will be able to debug it.

 

Links

Microchip PIC24HJ128GP306 page

Northern Software Home Development System Programmer/Debugger Supported Devices Contact Us Purchase/Vew Cart

© 2007-2017 Northern Software Inc. All Rights Reserved.