This PIC device is equipped with extremely low endurance flash. The datasheet specification guarantees only 100 erase/write cycles. It is easy to wear the flash out during development.
All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.
Refer to the datasheet for alternative connections of ENVREG pin.
NSDSP firmware contains all the necessary provisions for debugging PIC18F97J60 and may be debugged when debugging software becomes available.
This device can only be debugged when it runs at 2MHz or faster. This can only be accomplished with external clock source.
© 2007-2018 Northern Software Inc. All Rights Reserved.