Buy(Cart) Contact NSDSP Home
Northern Software Supported Devices PIC18F PIC18F1220 PIC18F1320 PIC18F13K22 PIC18F13K50 PIC18F14K22 PIC18F14K50 PIC18F2220 PIC18F2221 PIC18F2320 PIC18F2321 PIC18F2331 PIC18F23K20 PIC18F23K22 PIC18F2410 PIC18F242 PIC18F2420 PIC18F2423 PIC18F2431 PIC18F2450 PIC18F2455 PIC18F2458 PIC18F248 PIC18F2480 PIC18F24J10 PIC18F24J11 PIC18F24J50 PIC18F24K20 PIC18F24K22 PIC18F24K40 PIC18F24K42 PIC18F24K50 PIC18F24Q10 PIC18F2510 PIC18F2515 PIC18F252 PIC18F2520 PIC18F2523 PIC18F2525 PIC18F2550 PIC18F2553 PIC18F258 PIC18F2580 PIC18F2585 PIC18F25J10 PIC18F25J11 PIC18F25J50 PIC18F25K20 PIC18F25K22 PIC18F25K40 PIC18F25K42 PIC18F25K50 PIC18F25K80 PIC18F25K83 PIC18F25Q10 PIC18F2610 PIC18F2620 PIC18F2680 PIC18F2682 PIC18F2685 PIC18F26J11 PIC18F26J13 PIC18F26J50 PIC18F26J53 PIC18F26K20 PIC18F26K22 PIC18F26K40 PIC18F26K42 PIC18F26K80 PIC18F26K83 PIC18F27J13 PIC18F27J53 PIC18F27K40 PIC18F27K42 PIC18F4220 PIC18F4221 PIC18F4320 PIC18F4321 PIC18F4331 PIC18F43K20

PIC18F43K22

PIC18F4410 PIC18F442 PIC18F4420 PIC18F4423 PIC18F4431 PIC18F4450 PIC18F4455 PIC18F4458 PIC18F448 PIC18F4480 PIC18F44J10 PIC18F44J11 PIC18F44J50 PIC18F44K20 PIC18F44K22 PIC18F4510 PIC18F4515 PIC18F452 PIC18F4520 PIC18F4523 PIC18F4525 PIC18F4550 PIC18F4553 PIC18F458 PIC18F4580 PIC18F4585 PIC18F45J10 PIC18F45J11 PIC18F45J50 PIC18F45K20 PIC18F45K22 PIC18F45K40 PIC18F45K42 PIC18F45K50 PIC18F45K80 PIC18F4610 PIC18F4620 PIC18F4680 PIC18F4682 PIC18F4685 PIC18F46J11 PIC18F46J13 PIC18F46J50 PIC18F46J53 PIC18F46K20 PIC18F46K22 PIC18F46K40 PIC18F46K42 PIC18F46K80 PIC18F47J13 PIC18F47J53 PIC18F47K40 PIC18F47K42 PIC18F55K42 PIC18F56K42 PIC18F57K42 PIC18F63J11 PIC18F63J90 PIC18F64J11 PIC18F64J90 PIC18F6520 PIC18F6525 PIC18F6527 PIC18F6585 PIC18F65J10 PIC18F65J11 PIC18F65J15 PIC18F65J50 PIC18F65J90 PIC18F65J94 PIC18F65K22 PIC18F65K40 PIC18F65K80 PIC18F65K90 PIC18F6620 PIC18F6621 PIC18F6622 PIC18F6627 PIC18F6628 PIC18F6680 PIC18F66J10 PIC18F66J11 PIC18F66J15 PIC18F66J16 PIC18F66J50 PIC18F66J55 PIC18F66J60 PIC18F66J65 PIC18F66J90 PIC18F66J93 PIC18F66J94 PIC18F66J99 PIC18F66K22 PIC18F66K40 PIC18F66K80 PIC18F66K90 PIC18F6720 PIC18F6722 PIC18F6723 PIC18F67J10 PIC18F67J11 PIC18F67J50 PIC18F67J60 PIC18F67J90 PIC18F67J93 PIC18F67J94 PIC18F67K22 PIC18F67K40 PIC18F67K90 PIC18F83J11 PIC18F83J90 PIC18F84J11 PIC18F84J90 PIC18F8520 PIC18F8525 PIC18F8527 PIC18F8585 PIC18F85J10 PIC18F85J11 PIC18F85J15 PIC18F85J50 PIC18F85J90 PIC18F85J94 PIC18F85K22 PIC18F85K90 PIC18F8620 PIC18F8621 PIC18F8622 PIC18F8627 PIC18F8628 PIC18F8680 PIC18F86J10 PIC18F86J11 PIC18F86J15 PIC18F86J16 PIC18F86J50 PIC18F86J55 PIC18F86J60 PIC18F86J65 PIC18F86J72 PIC18F86J90 PIC18F86J93 PIC18F86J94 PIC18F86J99 PIC18F86K22 PIC18F86K90 PIC18F8720 PIC18F8722 PIC18F8723 PIC18F87J10 PIC18F87J11 PIC18F87J50 PIC18F87J60 PIC18F87J72 PIC18F87J90 PIC18F87J93 PIC18F87J94 PIC18F87K22 PIC18F87K90 PIC18F95J94 PIC18F96J60 PIC18F96J65 PIC18F96J94 PIC18F96J99 PIC18F97J60 PIC18F97J94

PIC18F43K22

Support summary

  • Programming - Yes
  • Debugging provisions - Yes
ICSP connection

 

ICSP Connection

All VSS and VDD pins must be connected. Even if one of these pins is not connected, programming may fail.

 

LVP Limitations

Since NSDSP is a Low-Voltage Programmer (LVP), it can only program PIC devices if LVP configuration bit is enabled. Fresh (unprogrammed) devices have LVP bit set and therefore they can be programmed. It is impossible to disable LVP bit during LVP programming, but if the device has been previously programmed with HVP programmer, the LVP bit may have been disabled.

When brown-out is enabled with BOREN configuration bit, LVP is only possible when the VDD voltage is above the brown-out threshold.

These limitations may be avoided with High-Voltage Programming (HVP), however NSDSP requires an external circuit for HVP.

 

Target Voltage below 2.7V

If voltage is less than 2.7V it is impossible to bulk erase the device. Unless the PIC device is code protected, NSDSP still can program the device, however, without the bulk erase it takes longer.

NSDSP cannot detect target voltage and it assumes that the voltage is above 2.7V. This ensures fast programming at usual voltages. However, if you want to program at voltages below 2.7V, you must specify the actual target voltage through programming software, or the programming will fail. If you specify the voltage below 2.7V NSDSP will apply special programming algorithm, which does not use bulk erase, but is slower than the regular algorithm.

If you are programming a device which is code protected, NSDSP cannot remove protection if the voltage is below 2.7V.

When programming at voltages below 2.7V, NSDSP tries to save time, and therefore does not erase data EEPROM unless some part of data EEPROM needs to be programmed. If erasing data EEPROM is necessary, you can erase the device manually before programming.

 

Debugging

NSDSP firmware contains all the necessary provisions for debugging PIC18F43K22 and may be debugged when debugging software becomes available.

 

Links

Microchip PIC18F43K22 page

Northern Software Home NSDSP Contact Us Purchase/Vew Cart

© 2007-2018 Northern Software Inc. All Rights Reserved.