PIC16LF648A

Support summary

• Programming - Yes
• Debugging provisions - No

ICSP Connection

Programming is impossible at voltages below 4.5V.

LVP Limitations

Since NSDSP is a Low-Voltage Programmer (LVP), it can only program PIC devices if LVP configuration bit is enabled. Fresh (unprogrammed) devices have LVP bit set and therefore they can be programmed. It is impossible to disable LVP bit during LVP programming, but if the device has been previously programmed with HVP programmer, the LVP bit may have been disabled.

When brown-out is enabled with BOREN configuration bit, LVP is only possible when the VDD voltage is above the brown-out threshold.

NSDSP cannot perform High-Voltage Programming (HVP) with PIC16LF648A even if you install HVP circuit.

Debugging

NSDSP cannot be used to debug PIC16LF648A.

Links

Microchip PIC16LF648A page